KANKOL 625P
Technical Literature
Technical Data :-
| Colour | Grey ( After mixing Base and Hardener) |
| Pot Life at 25o C | Min 2 hrs |
| Service Temperature | - 40o C to + 80o C |
| Typical Shore A Hardness | 15 - 20 |
| Cure Rate at 20o C/65 % RH | RH 7 days at 20 Degree C in a typical joint. At lower temperatures cure rate will be slower. |
| Chemical Resistance | Resistant to most dilute acids and alkalis, petrol, iesel, jet fuel and many solvents and vegetable oils. |
Movement Accommodation:
Butt joints- (Movement in tension and compression): 30 %.
Lap Joints (movement in shear): 50 %
Joint Backing
Where applicable, appropriate joint filler e.g. closed cell polyethylene foam, should be used to provide the correct joint depth.
.
Joint Size Suitability
| Joint Width | Min 6 mm,Max 25 mm (Single Application), 50mm (multiple applications) |
| Joint Depth | Min 10 mm on porous substrate Min 6 mm on non porous substrate Maximum 25 mm |
| Width : Depth ratio | 2:1 butt Joint ,1:1 floor Joints |
